Hot
ViaSat-10
$399.00
The ViaSat-10 is a Class I Div 1, magnetic-mount, satellite vibration monitoring device with built-in solar panel and batteries, ideal for monitoring the status of pumpjacks, compressors, switches, and more. ViaSat-10 is a satellite-based solution that works anywhere, and is ideal for locations with no cellular coverage.
- Satellite monitoring for Pumpjacks, Compressors, Generators, Motors, Pumps, Rental Units, Run Status, and More
- Vibration Sensor, 2 Digital Inputs, GPS
- Alarm Callout / Alarm Notifications via SMS, Email, and / or Voice Messages
- Escalating call lists can be set up to notify available staff of shutdowns
- Built-in Solar Panel and rechargeable NiMH Battery
- Class I, Division 1, Groups A-D, T4
- Temperature: -40˚ C to +65˚ C
- Magnetic Mount Option
Description
The ViaSat-10 is a Class I Div 1, magnetic-mount, satellite vibration monitoring device with built-in solar panel and batteries, ideal for monitoring the status of pumpjacks, compressors, switches, and more. ViaSat-10 is a satellite-based solution that works anywhere, and is ideal for locations with no cellular coverage.
- Satellite monitoring for Pumpjacks, Compressors, Generators, Motors, Pumps, Rental Units, Run Status, and More
- Vibration Sensor, 2 Digital Inputs, GPS
- Alarm Callout / Alarm Notifications via SMS, Email, and / or Voice Messages
- Escalating call lists can be set up to notify available staff of shutdowns
- Built-in Solar Panel and rechargeable NiMH Battery
- 8.26 cm x 17.78 cm x 2.86 cm
- Class I, Division 1, Groups A-D, T4
- Class I, Zone 0, AEx ia IIC T4 Ga
- ATEX/IECEx II 1 G, Ex ia IIC T4 Ga
- Temperature: -40˚ C to +65˚ C
- Magnetic Mount Option
Additional information
| Weight | .5 kg |
|---|---|
| Dimensions | 20 × 9 × 4 cm |
| Communication Type |
Satellite |
| Mounting |
Magnetic |
| Certification |
Class I Div 1 |
| Interface |
Built-In Vibration ,Digital Input |
Related products
Omni Antenna
This omni antenna is designed for outdoor, industrial use. It covering Dual-Band 800 & 1900 MHz on 50 Ohm, providing 9 dBi gain on both 806 to 894 MHz band and 1850 to 1995 MHz frequency.
The antenna includes a mounting kit that can be used to mount the antenna on to roof or pole.
The antenna has 50 Ohm impedance and N-Female connector type. Being omni-directional, it collects signals from various cell towers in the process boosting different carrier’s signals on both bandwidths stated above. The antenna provides approximately 50 miles range to an unobstructed tower.
Summary.
- Omni-directional
- Signal boost for 2G, 3G, 4G
- Dual Band (800 & 1900 MHz)
- 9 dB Gain
- Outside use
- Weather resistant
- Easy-to-install
RF Surge Protector
Coaxial RF surge protector (also known as lightning surge protector, lightning surge arrestor or suppressor) DT-NFF helps protect your equipment from electromagnetic pulse (EMP) or power surges that are commonly caused by lightning or other strong electrical changes. Our radio frequency coaxial surge protector product is commonly used for radio and antenna installations where part or all system equipment is outdoors to protect sensitive equipment and is designed to pass DC to 3 GHz while suppressing DC surge.
ViaCell-10
The ViaCell-10 is a magnetic-mount, cellular vibration monitoring device with built-in solar panel and batteries, ideal for monitoring the status of pumpjacks, compressors, generators, and more. ViaCell-10 provides run status alerts, GPS coordinates, as well as temperature readings.
- Cellular monitoring for Pumpjacks, Compressors, Generators, Towable Generators, Motors, Pumps, Rental Units, Run Status, and More
- Vibration Sensor, Temperature, GPS
- Out-of-the-box web portal to access asset status online (2 month trial*)
- Alarm Callout / Alarm Notifications via SMS, Email, and / or Voice Messages
- Escalating call lists can be set up to notify available staff of shutdowns
- Built-in Solar Panel and rechargeable battery
- 8cm x 15cm x 4cm
- Temperature: -30˚ C to +65˚ C
- Magnetic Mount
ViaCell-100
The ViaCell-100 is a Class 1 Div 2, weatherproof, SCADA / IIoT cellular remote monitoring device that can be used to monitor AIs, DIs, pressures, vibrations, levels, and more. It is everything you need for monitoring sensors in a simple, easy-to-install package.
- Monitoring for Tank Level, Water Level, Compressors, Generators, Motors, Pumps, VFDs, Solar Arrays, Temperature, Wind Direction, and More
- Alarm Callout / Alarm Notifications via SMS, Email, and / or Voice Messages
- 4 AIN, 4 AOUT, 1 DIN, 1 DOUT
- HART 5, HART 7, Modbus RTU, Modbus ASCII
- Embedded 2G, 3G, LTE
- Class 1 Div 2, -40˚ C to +85˚ C
- Magnetic Mount | Pole Mount
- Low-Power, Replaceable Battery with ~2 Year Life
- Solar-Panel (C1D2) Add-On Available
ViaSat-100
The ViaSat-100 is a Class 1 Div 2 satellite transceiver with universal protocol capabilities that can be used to monitor flow parameters, tank level, water level, pressures, and more. The transceiver provides two-way satellite communication, providing both monitoring and control capabilities. The ViaSat-100 has RS-232, RS-485, and 4 analog or digital input/output.
- Monitoring for Flow, Tank Level, Water Level, Pressures, and More
- Two-way satellite communication
- 4 analog or digital in/out
- RS-232 and RS-485
- Compatible with Modbus, ROCTalk, ABB, and many devices and protocols
- Alarm Callout / Alarm Notifications via SMS, Email, and / or Voice Messages
- Operating temperature: -40°C to +85°C
- Class 1 Div 2, -40˚ C to +85˚ C
- Pole Mount
