Hot
Previous product
ViaSat-10 $399.00
Back to products
Next product
ViaCell-100 $599.00

ViaSat-100

$899.00

The ViaSat-100 is a Class 1 Div 2 satellite transceiver with universal protocol capabilities that can be used to monitor flow parameters, tank level, water level, pressures, and more. The transceiver provides two-way satellite communication, providing both monitoring and control capabilities. The ViaSat-100 has RS-232, RS-485, and 4 analog or digital input/output.

  • Monitoring for Flow, Tank Level, Water Level, Pressures, and More
  • Two-way satellite communication
  • 4 analog or digital in/out
  • RS-232 and RS-485
  • Compatible with Modbus, ROCTalk, ABB, and many devices and protocols
  • Alarm Callout / Alarm Notifications via SMS, Email, and / or Voice Messages
  • Operating temperature: -40°C to +85°C
  • Class 1 Div 2, -40˚ C to +85˚ C
  • Pole Mount
Categories: , Tags: , ,
Description

The ViaSat-100 is a satellite transceiver with universal protocol capabilities. It is everything you need for Satellite SCADA / Remote Monitoring.

  • Monitoring for Flow, Tank Level, Water Level, Pressures, and More
  • Two-way satellite communication
  • Elevation angle: -5° to +90°
  • 4 analog or digital in/out
  • RS-232 and RS-485
  • Compatible with Modbus, ROCTalk, ABB, and many devices and protocols
  • Alarm Callout / Alarm Notifications via SMS, Email, and / or Voice Messages
  • Input voltage: 9V to 32V
  • Operating temperature: -40°C to +85°C
  • Class 1 Div 2, -40˚ C to +85˚ C
  • 12.6 cm x 12.6 cm x 4.9 cm
  • Pole Mount

Related products

Hot
Close

Omni Antenna Package

$399.00
SCADACore's Antenna Package contains all equipment needed to connect cellular modems to cell towers.
  • Omni antenna with pole-mounting kit
  • PolyPhaser for surge protection
  • 15m N-Type MNP to N-Type MNP cable
  • 50cm SMA Male To N Type Male RG58 Pigtail Cable Connector
Add to cart
Hot
Close

ViaCell-100

$599.00
The ViaCell-100 is a Class 1 Div 2, weatherproof, SCADA / IIoT cellular remote monitoring device that can be used to monitor AIs, DIs, pressures, vibrations, levels, and more. It is everything you need for monitoring sensors in a simple, easy-to-install package.
  • Monitoring for Tank Level, Water Level, Compressors, Generators, Motors, Pumps, VFDs, Solar Arrays, Temperature, Wind Direction, and More
  • Alarm Callout / Alarm Notifications via SMS, Email, and / or Voice Messages
  • 4 AIN, 4 AOUT, 1 DIN, 1 DOUT
  • HART 5, HART 7, Modbus RTU, Modbus ASCII
  • Embedded 2G, 3G, LTE
  • Class 1 Div 2, -40˚ C to +85˚ C
  • Magnetic Mount | Pole Mount
  • Low-Power, Replaceable Battery with ~2 Year Life
  • Solar-Panel (C1D2) Add-On Available
Add to cart
Close

Pressure Sensor A6

$99.00
Series A6 Durable Pressure Switches have been specifically designed to standup to extended duty applications. These switches are constructed with a polyimide film diaphragm and are compatible with a variety of fluids. For ease of installation,the switches come with a 1/4" male NPT process connection and can be mounted in any orientation. The Series A6 pressure switches are compact and have great setpoint integrity, and feature simple, easy set-point field adjustment.
Add to cart
Close

Omni Antenna

$199.00
This omni antenna is designed for outdoor, industrial use. It covering Dual-Band 800 & 1900 MHz on 50 Ohm, providing 9 dBi gain on both 806 to 894 MHz band and 1850 to 1995 MHz frequency. The antenna includes a mounting kit that can be used to mount the antenna on to roof or pole.
The antenna has 50 Ohm impedance and N-Female connector type. Being omni-directional, it collects signals from various cell towers in the process boosting different carrier’s signals on both bandwidths stated above. The antenna provides approximately 50 miles range to an unobstructed tower.
Summary.
  • Omni-directional
  • Signal boost for 2G, 3G, 4G
  • Dual Band (800 & 1900 MHz)
  • 9 dB Gain
  • Outside use
  • Weather resistant
  • Easy-to-install
Add to cart
Close

Yagi Antenna

$199.00
Wide-band, high-gain, directional, 50 Ohm Yagi antenna with N-Female connector.
  • N-Female connector
  • 8 dBi Gain
  • 50 Ohm
  • Wide band: 2G, 3G & 4G LTE (698 - 2700 MHz)
  • Includes mounting hardware
Add to cart
Hot
Close

ViaCell-10

$225.00
The ViaCell-10 is a magnetic-mount, cellular vibration monitoring device with built-in solar panel and batteries, ideal for monitoring the status of pumpjacks, compressors, generators, and more. ViaCell-10 provides run status alerts, GPS coordinates, as well as temperature readings.
  • Cellular monitoring for Pumpjacks, Compressors, Generators, Towable Generators, Motors, Pumps, Rental Units, Run Status, and More
  • Vibration Sensor, Temperature, GPS
  • Out-of-the-box web portal to access asset status online (2 month trial*)
  • Alarm Callout / Alarm Notifications via SMS, Email, and / or Voice Messages
  • Escalating call lists can be set up to notify available staff of shutdowns
  • Built-in Solar Panel and rechargeable battery
  • 8cm x 15cm x 4cm
  • Temperature: -30˚ C to +65˚ C
  • Magnetic Mount
* $25/month after trial period
Add to cart
Close

ViaCell-1000C

$599.00
The ViaCell-1000C is a Class 1 Div 2 cellular modem that are used to retrieve data from flow meters, data loggers, and more. ViaCell-1000C is an ideal solution for monitoring ABB Totalflows, ROCs, SCADAPacks, and more.
  • Monitoring for a wide-range of industrial applications
  • 4G / LTE / HSPA+ Operation
  • Front RS232 Port, and Configurable RS232 / RS485 Port
  • 8x Analog Input / Output or 8x Digital Outputs
  • Alarm Callout / Alarm Notifications via SMS, Email, and / or Voice Messages
  • Class I Div 2, Group A, B, C, and D Hazardous Locations
  • Wide Operating Temp (-40C to +85C)
Add to cart
Close

Ultrasonic Tank Level Sensor

$799.00
The Ultrasonic Tank Level Sensor is ideal for use on industrial tanks and in classified locations; providing tank level measurements with Modbus output. Rugged, low-power, and rated Intrinsically Safe, Class I Div 1, for hazardous location, with optional Gas Discharge Tube Surge Protection.
Add to cart