Hot
Previous product
ViaSat-10
ViaSat-10 $399.00
Back to products
Next product
ViaCell-100
ViaCell-100 $599.00

ViaSat-100

$899.00

The ViaSat-100 is a Class 1 Div 2 satellite transceiver with universal protocol capabilities that can be used to monitor flow parameters, tank level, water level, pressures, and more. The transceiver provides two-way satellite communication, providing both monitoring and control capabilities. The ViaSat-100 has RS-232, RS-485, and 4 analog or digital input/output.

  • Monitoring for Flow, Tank Level, Water Level, Pressures, and More
  • Two-way satellite communication
  • 4 analog or digital in/out
  • RS-232 and RS-485
  • Compatible with Modbus, ROCTalk, ABB, and many devices and protocols
  • Alarm Callout / Alarm Notifications via SMS, Email, and / or Voice Messages
  • Operating temperature: -40°C to +85°C
  • Class 1 Div 2, -40˚ C to +85˚ C
  • Pole Mount
Categories: , Tags: , ,
Description

The ViaSat-100 is a satellite transceiver with universal protocol capabilities. It is everything you need for Satellite SCADA / Remote Monitoring.

  • Monitoring for Flow, Tank Level, Water Level, Pressures, and More
  • Two-way satellite communication
  • Elevation angle: -5° to +90°
  • 4 analog or digital in/out
  • RS-232 and RS-485
  • Compatible with Modbus, ROCTalk, ABB, and many devices and protocols
  • Alarm Callout / Alarm Notifications via SMS, Email, and / or Voice Messages
  • Input voltage: 9V to 32V
  • Operating temperature: -40°C to +85°C
  • Class 1 Div 2, -40˚ C to +85˚ C
  • 12.6 cm x 12.6 cm x 4.9 cm
  • Pole Mount
Additional information
Weight 1 kg
Dimensions 13 × 13 × 5 cm
Communication Type

Satellite
Certification

Class I Div 2
Interface

Analog Input, Digital Input, Digital Output, RS232, RS485
Mounting

Pole

Related products

Close

Omni Antenna

$199.00
This omni antenna is designed for outdoor, industrial use. It covering Dual-Band 800 & 1900 MHz on 50 Ohm, providing 9 dBi gain on both 806 to 894 MHz band and 1850 to 1995 MHz frequency. The antenna includes a mounting kit that can be used to mount the antenna on to roof or pole.
The antenna has 50 Ohm impedance and N-Female connector type. Being omni-directional, it collects signals from various cell towers in the process boosting different carrier’s signals on both bandwidths stated above. The antenna provides approximately 50 miles range to an unobstructed tower.
Summary.
  • Omni-directional
  • Signal boost for 2G, 3G, 4G
  • Dual Band (800 & 1900 MHz)
  • 9 dB Gain
  • Outside use
  • Weather resistant
  • Easy-to-install
Add to cart
Hot
Close

ViaCell-100

$599.00
The ViaCell-100 is a Class 1 Div 2, weatherproof, SCADA / IIoT cellular remote monitoring device that can be used to monitor AIs, DIs, pressures, vibrations, levels, and more. It is everything you need for monitoring sensors in a simple, easy-to-install package.
  • Monitoring for Tank Level, Water Level, Compressors, Generators, Motors, Pumps, VFDs, Solar Arrays, Temperature, Wind Direction, and More
  • Alarm Callout / Alarm Notifications via SMS, Email, and / or Voice Messages
  • 4 AIN, 4 AOUT, 1 DIN, 1 DOUT
  • HART 5, HART 7, Modbus RTU, Modbus ASCII
  • Embedded 2G, 3G, LTE
  • Class 1 Div 2, -40˚ C to +85˚ C
  • Magnetic Mount | Pole Mount
  • Low-Power, Replaceable Battery with ~2 Year Life
  • Solar-Panel (C1D2) Add-On Available
Add to cart
Hot
Close

ViaSat-10

$399.00
The ViaSat-10 is a Class I Div 1, magnetic-mount, satellite vibration monitoring device with built-in solar panel and batteries, ideal for monitoring the status of pumpjacks, compressors, switches, and more. ViaSat-10 is a satellite-based solution that works anywhere, and is ideal for locations with no cellular coverage.
  • Satellite monitoring for Pumpjacks, Compressors, Generators, Motors, Pumps, Rental Units, Run Status, and More
  • Vibration Sensor, 2 Digital Inputs, GPS
  • Alarm Callout / Alarm Notifications via SMS, Email, and / or Voice Messages
  • Escalating call lists can be set up to notify available staff of shutdowns
  • Built-in Solar Panel and rechargeable NiMH Battery
  • Class I, Division 1, Groups A-D, T4
  • Temperature: -40˚ C to +65˚ C
  • Magnetic Mount Option
Add to cart
Hot
Close

ViaCell-10

$225.00
The ViaCell-10 is a magnetic-mount, cellular vibration monitoring device with built-in solar panel and batteries, ideal for monitoring the status of pumpjacks, compressors, generators, and more. ViaCell-10 provides run status alerts, GPS coordinates, as well as temperature readings.
  • Cellular monitoring for Pumpjacks, Compressors, Generators, Towable Generators, Motors, Pumps, Rental Units, Run Status, and More
  • Vibration Sensor, Temperature, GPS
  • Out-of-the-box web portal to access asset status online (2 month trial*)
  • Alarm Callout / Alarm Notifications via SMS, Email, and / or Voice Messages
  • Escalating call lists can be set up to notify available staff of shutdowns
  • Built-in Solar Panel and rechargeable battery
  • 8cm x 15cm x 4cm
  • Temperature: -30˚ C to +65˚ C
  • Magnetic Mount
* $25/month after trial period
Add to cart
Hot
Close

ViaCell-1000B

$549.00
The ViaCell-1000B is a cellular modem that is used to retrieve data from sensors and devices. ViaCell-1000B is an ideal solution for IoT monitoring.
  • Monitoring for a wide-range of industrial applications
  • 4G / LTE Operation
  • HSPA / HSPA+ Fallback Support
  • Ethernet w/ PoE
  • RS232 Serial Data Port
  • Alarm Callout / Alarm Notifications via SMS, Email, and / or Voice Messages
  • Wide Operating Temp (-40C to +85C)
Add to cart
Close

RF Surge Protector

$99.00
Coaxial RF surge protector (also known as lightning surge protector, lightning surge arrestor or suppressor) DT-NFF helps protect your equipment from electromagnetic pulse (EMP) or power surges that are commonly caused by lightning or other strong electrical changes. Our radio frequency coaxial surge protector product is commonly used for radio and antenna installations where part or all system equipment is outdoors to protect sensitive equipment and is designed to pass DC to 3 GHz while suppressing DC surge.
Add to cart
Close

Ultrasonic Tank Level Sensor

$799.00
The Ultrasonic Tank Level Sensor is ideal for use on industrial tanks and in classified locations; providing tank level measurements with Modbus output. Rugged, low-power, and rated Intrinsically Safe, Class I Div 1, for hazardous location, with optional Gas Discharge Tube Surge Protection.
Add to cart
Close

AGA Calculation Source Code (C#, Python, C++)

$4,999.00
SCADACore provides American Gas Association (AGA) calculation libraries and full source code to developers needing to calculate gas flow. SCADACore’s AGA Gas Flow Library provides AGA gas flow calculations provided by the American Gas Association. All available AGA Calculations are combined into one easy-to-use DLL. The source code is designed to be deployed for embedded use. Full C#, Python, and C++ Source Code License
  • License will allow a company to build applications that are accessible by both customers and internal employees.
  • License can be used as a part of an existing application to add real-time gas flow calculations.
  • License does not have limits on the number of developers or the the number of applications that are created.
  • License can not be used to offer a free gas flow calculator similar to the SCADACore’s AGA Gas Flow Calculators, SCADACore’s AGA Gas Flow Calculators For Windows, or SCADACore’s Mobile Gas Flow Calculators
Add to cart